All the below products are in production

1500w Programmable Power supply

50v,100v,150v,200,220v,300v,400v,500v,600v,750v variants available
Extremely compact and light weight
325mm x 275mm x 110mm, 6.6kg
RS485 interface with MODBUS RTU
Multi Turn POT for precise control
10 user settable parameters
Input: Single Phase AC
Power: upto 1500W

3000w Programmable Power supply

24v,32v,50v,100v,150v,200,220v,300v,400v,500v,600v,750v variants available
Extremely compact and light weight
450mm x 300mm x 180mm, 12kg
Multi Turn POT for precise control
10 user settable parameters
Input: Single Phase AC
Power: upto 3000W
RS485 interface with MODBUS RTU

750v,10A Drone Ground station Power source

7.5KW rated available in 1phase and 3 phase
Suitable for full load operation
Multi Turn POT for precise control
Cable drop compensation
10 user settable parameters
RS485 interface with MODBUS RTU

750w Programmable DC Power supplies

RS485 interface with MODBUS RTU

Dimensions: 275mm x 165mm x 110mm 3.3kg

0-32v: 0-5A, 0-10A, 0-15A , 0-20A

0-50v: 0-5A, 0-10A, 0-15A

0-80v: 0-5A, 0-10A

0-100v: 0-5A, 0-7.5A

0-150v 0-1A, 0-2A, 0-3A

0-200v 0-3A, 0-4A

0-300v 0-1A, 0-2A

0-400v 0-1A, 0-2A

0-500v 0-1.5A
0-600v 0-1.2A

0-750v 0-1A

0-1000v 0-0.5A

Starter Motor Cranking Power supply

Suitable for heavy inrush current applications like engine cracking
0..15V Variable voltage by POT
500A Peak, 80A continuous current
Optional Programmable interface with MODBUS RTU for test automation
Input: Single Phase AC
Power: 1.2kW

Dual Programmable power supply

Available from 12v till 750v
Current 1A till 5A
Tracking and independent mode

Dual Channel DC power supply

+64V GND -64v Variable voltage POT
0…5A Variable current by POT
Single POT controls both voltage
Single POT controls both current
Independent displays for each channel
Power: 320watts x 2
Remote: RS485 / USB (Optional)

Electroplating DC power supply

400v,10A Voltage and current power supply
Integrated Ramp and Run timer
POT controls for voltage, current and timer functions
Audible alarm on plating completion
Independent displays for all information
Power: 4kw
Remote: RS485 / USB (Optional)

High current power supplies

0..30V Variable voltage by POT
0..100A / 200A Variable current by POT
Programmable interface via MODBUS RTU
Input: Single Phase AC
Power: 6kw

5kw,10kw,15kw Power supply

Available in range of voltage from 12v till 750v
Current from 1A - 200A
Extremely compact and light weight
Multi Turn POT for precise control
Input: Single Phase AC

2kVA 60hz 120V isolated AC source

230v 50Hz Mains input
120v 60Hz 16A output
Constant output voltage independent of input voltage
Constant output frequency independent of input frequency
Fully isolated
Short circuit protection
Power: 2kVA
Light weight design